Getting Started; Pitcher Assembly & Use - NUTRIBULLET Smart Touch Blender Combo User Manual

Getting
started.
PLEASE KEEP
THESE IMPORTANT
SAFEGUARDS IN
MIND WHEN USING
THE APPLIANCE:
• Make sure the base is plugged in
for use.
• Never run the appliance while empty.
• Appliance accessories are not
intended to be used in the microwave
as it may damage the accessories.
Never
• leave the appliance
unattended while in use.
Never blend hot or carbonated
liquids or ingredients when using
any sealed NutriBullet cups.
Heated ingredients can pressurize
sealed containers when agitated
and violently expel hot contents upon
opening. Always start the blending
process with room temperature or
refrigerated ingredients and liquids
(21°C/70°F or cooler).
Pitcher assembly
& use.
Review all warning and caution
statements in the Important Safeguards
section (pg 2-9) and on the previous
page before proceeding to Step 1.
14
Use extra caution when
blending hot liquids or
ingredients in the pitcher.
Steam and splatters can escape
through the vented lid, potentially
causing scalding and/or burns.
NEVER
blend hot liquids in your
pitcher without the pitcher lid
and vented lid cap attached. The
vented lid cap is ventilated to allow
steam and pressure to release,
while guarding against excess
NEVER blend hot liquids
splashing.
in your NutriBullet cups or any
other sealed vessel, only use the
vented pitcher.
When blending hot liquids in the
vented pitcher, add liquid and solid
ingredients to your pitcher below
their respective MAX lines. Attach
the pitcher lid with the vented lid
cap inserted. Press
select desired program or begin
LOW
blending on
ingredients are integrated and
the mixture is level (no splashing),
increase speed as needed.
Always use care when opening
the pitcher lid after blending hot
ingredients making sure that excess
pressure has been released.
1
Place the motor base on
a clean, dry, level surface
such as a counter or table.
POWER
, then
setting. Once