Getting Started; Pitcher Assembly & Use - NUTRIBULLET Select User Manual

Getting started

PLEASE KEEP THESE
IMPORTANT SAFEGUARDS IN
MIND WHEN USING
THE APPLIANCE:
• Make sure the base is plugged in
for use.
• DO NOT attempt to operate the pitcher
on the appliance without attaching
the pitcher lid and vented lid cap.
• Never run the appliance while empty.
• Appliance accessories are not
intended to be used in the microwave
as it may damage the accessories.
Never
• leave the appliance
unattended while in use.
Never blend hot ingredients
when using any sealed
nutribullet
®
Heated ingredients can pressurize
sealed containers when agitated
and violently expel hot contents upon
opening. Always start the blending
process with room temperature or
refrigerated ingredients and liquids
(21°C/70°F or cooler).
Pitcher assembly
& use
1
Review all warning and
caution statements in the
Important Safeguards
section (pg 2-12) and
on the previous page before
proceeding to Step 2.
18
cups.
Use extra caution when
blending hot liquids in
the pitcher.
Steam and splatters can escape
through the vented lid, potentially
causing scalding and/or burns.
NEVER
blend hot liquids in your
pitcher without the pitcher lid
and vented lid cap attached. The
vented lid cap is ventilated to allow
steam and pressure to release,
while guarding against excess
NEVER blend hot liquids
splashing.
in your Nutribullet cups or any
other sealed vessel.
When blending hot liquids, add
liquid and solid ingredients to your
pitcher below their respective
MAX lines. Attach the pitcher lid
with the vented lid cap inserted.
POWER
Press the
LOW
blending on the
ingredients are integrated and
the mixture is level (no splashing),
increase speed as needed.
2
Place the motor base on
a clean, dry, level surface
such as a counter or table.
icon, then begin
setting. Once