Hardware Pack - Yard Machines 611 Operator's Manual

SECTION 2: CONTENTS OF HARDWARE PACK
Lay out the hardware according to the illustration below for identification purposes. Part numbers are shown in
parentheses. (Hardware pack may contain extra items which are not used on your unit.)
A
(2)Hex Bolts (A)
(710-3180)
(2) Hex Bolts (B)
710-3008
D
(2) Hex
Bolts (G)
(710-3015)
G
Cupped Washer (N)
(736-0242)
(2) Flat Washers (S)
(736-0185)
* The augers are secured to the spiral shaft with two shear bolts and hex lock nuts. If you hit a hard foreign object or an ice jam, the snow
thrower is designed so that the bolts may shear. Two replacement shear bolts and nuts are provided for your convenience. Store in a safe
place until needed.
(4)Lock Washers (C) B
(736-0119)
C
(2) Saddle (I)
(784-5599)
(4) Self-Tapping
Screws (F)
(710-0599)
(2) Hex Lock Nuts (H)
(712-3027)
(2) Hex Nuts (D)
(712-3010)
H
Hairpin Clip (T)
(714-0104)
5
(4) Carriage Bolts (E)
(710-0262)
(4) Hex Nuts (D)
(712-3010)
E
(2) "Z" Fitting (R)
(746-0778)
F
(6) Hex Bolts (K)
(710-3015)
*
(2) Hex Lock Nuts
(712-0429)
(4) Hex Nuts (D)
(712-3010)
(4) Lock
Washers (C)
(736-0119)
(2) Hex Nuts (J)
(712-0121)
(6) Hex Lock Nuts (M)
(712-3027)
(3) Chute Flange Keepers
(Not Shown) (731-0851)
(2) Shear Bolts
(710-0890A)