Contents Of Hardware Pack - Yard Machines 615 Operator's Manual

SECTION 2: CONTENTS OF HARDWARE PACK
Lay out the hardware according to the illustration for identification purposes. Part numbers are shown in parentheses. (Hard-
ware pack may contain extra items which are not used on your unit.)
A
ATTACHING THE HANDLES
(2) Hex Bolts
5/16-18 x 1-3/4" Long
(710-3180)
(2) Hex Bolts
5/16-18 x 3/4" Long
(710-3008)
ATTACHING THE SPEED SELECTOR PLATE
C
AND SHIFT LEVER
(2) Hex Bolts
1/4-20 x 3/4" lg.
(710-3015)
ATTACHING THE CHUTE DIRECTIONAL
F
CONTROL ASSEMBLY
5/16" Thread
(1) Hair Pin Clip
(714-0104)
(1) Cupped Washer
5/16" I.D.
(736-0242)
AUGER SHEAR BOLTS (SPARES)
G
(2) Handle Tabs
(784-5599)
(4) Lock Washers
5/16" I.D.
(736-0119)
(4) Self-Tapping
Screws
1/4-20 x 1/2" Lg.
(710-0599)
(2) Hex Lock Nuts
1/4" Thread
(712-3027)
(2) Flat Washers
3/8" I.D. x 5/8" O.D.
(736-0185)
(2)Hex Nut
(712-3010)
(2) Shear Bolts
(710-0890A)
B
ATTACHING THE HANDLE PANEL
(4) Carriage Bolts
5/16-18 x 1-1/2" Long
(710-0262)
(4) Hex Nuts
5/16" Thread
(712-3010)
D
ATTACHING THE CLUTCH CABLES
(2) "Z" Fitting
(746-0778)
E
ATTACHING THE CHUTE ASSEMBLY
(6) Hex Bolts
1/4-20 x 3/4" Lg.
(710-3015)
(2) Hex Lock Nuts
5/16" Thread
(712-0429)
5
(4) Lock Washers
5/16" I.D.
(736-0119)
(2) Hex Nuts
#10-24 Thread
(712-0121)
(6) Hex Lock Nuts
1/4" Thread
(712-3027)
(3) Chute Flange Keepers
(Not Shown) (731-0851)