Safety Instructions - Cosmo DN 25 Instructions For Use Manual

U N M I X E D P U M P G R O U P - D N 2 5 / D N 3 2
6 S A F E T Y I N S T R U C T I O N S
The installation and commissioning as well as the connection of electrical components require
technical knowledge commensurate with a recognised vocational qualification as a fitter for
plumbing, heating and air conditioning technology, or a profession requiring a comparable
level of knowledge [specialist].
The following must be observed during installation and commissioning:
relevant local and national regulations
accident prevention regulations of the professional association
instructions and safety instructions of this manual
CAUTION
Personal injury and damage to property!
The pump group must only be used in heating circuits filled
with heating water according to VDI 2035 / Ö-Norm H 5195-1.
The pump group must not be used in drinking water applications.
ATTENTION
Material damage due to mineral oils!
Mineral oil products cause lasting damage to seals made of EPDM, whereby the
sealant properties get lost. We do not assume liability nor provide warranty for
damage to property resulting from sealants damaged in this way.
It is imperative to avoid that EPDM gets in contact with substances
containing mineral oils.
Use a suitable silicone spray.
2 3