1 8
2 S C O P E O F D E L I V E R Y
Carefully read these instructions before installation and commissioning.
Save these instructions in the vicinity of the installation for future reference.
2 . 1 A B O U T T H E S E I N S T R U C T I O N S
These instructions describe the installation, commissioning, function and operation
of the unmixed pump group DN 25 and DN 32.
For other components of the installation, such as the pump, the controller or the
distribution manifold, please observe the separate instructions.
The chapters called [specialist] are intended for specialists only.
2 . 2 P R O D U C T D E S C R I P T I O N
The unmixed pump group DN 25 and DN 32 is a premounted group of fittings for heating circuits.
The pump can be isolated by means of the ball valves.
The pump can thus be maintained easily without draining the heating circuit.
The pump group is mounted directly on a distribution manifold or on a wall bracket.
The pump group and its insulation comply with EnEV.