HP 14s Maintenance And Service Manual page 59

10. If it is necessary to remove the display hinges:
a. Remove the three Phillips M2.5 × 2.5 screws (1) from the bottom of each hinge.
b. Rotate the hinges upward (2).
c. Remove the display hinges from the display back cover (3).
The display hinges are available as spare part number L96979-001.
11. If it is necessary to remove the display panel cable:
Peel the cable off the inside of the display back cover (1), and then remove the cable (2).
▲
The display cable is available as spare part number L96977-001.
12. If it is necessary to remove the WLAN antennas:
a. Peel the antennas off the top of the display back cover (1).
Component replacement procedures 51