HP 14s Maintenance And Service Manual page 56

b. Release the top edge of the display bezel (1) from the display assembly.
IMPORTANT:
the bezel.
c. Flex the inside of the top edge (1), left and right sides (2), and the inside of the bottom edge (3) of
the display bezel until the bezel disengages from the display enclosure.
d. Remove the display bezel from the display (4).
The display bezel is available as spare part number L96976-001.
8. If it is necessary to remove the webcam module:
a. Lift the webcam module to disengage the adhesive that secures the module to the display (1).
48 Chapter 5 Removal and replacement procedures for authorized service provider parts
When removing the bezel, be careful not to bend or break the narrow sections of