Using Commercially Available Speakers Or Cables - Yamaha CinemaStation DVR-S150 Owner's Manual

Using commercially available
speakers or cables
When using speakers or cables other than those of the
YAMAHA NX-P150 (consisting of four satellite speakers,
a center speaker and a subwoofer) and its supplied cables,
be careful of the following. When using a commercially
available speaker cable, remove the cable plug from one of
the supplied speaker cables and attach it to the cable you
are using.
When using commercially available speakers
• Use speakers with 6-ohm impedance or more. If a
speaker with less than 6-ohm impedance is used, the
protective circuit may trip or the speaker may
malfunction.
• Use magnetically shielded speakers to prevent
interferences with a TV. If these speakers still interfere
with a TV, move the speakers a little away from the TV.
• We recommend using speakers of the same
manufacturer that have identical sound qualities. If
they are mixed, certain sounds may be heard
unnaturally.
• Use speaker cables that are the same thickness as the
supplied cables.
When using commercially available speaker
cables
• Use speaker cables that are the same thickness as the
supplied cables.
To replace speaker cables
1
Press and hold the release button and
remove the supplied speaker cable from the
cable plug.
2
Note
Be sure to twist the cable core firmly in a clockwise direction.
Twisting loosely may cause a short.
3
Release button
Peel away about 10 mm (10/32") of covering
from the tip of the new cable and twist the
cable core firmly in a clockwise direction.
10 mm (10/32")
Clockwise
Press and hold the release button, insert the
cable core into the cable plug, then release
the button.
Match the speaker cable polarity (+/–) with the
polarity mark (+/–) of the cable plug.
Polarity mark –
Connecting Speakers
Polarity mark +
11