Presetting Radio Stations Manually (Manual Preset); Changing The Order Of Preset Radio Stations - Yamaha CinemaStation DVR-S150 Owner's Manual

Presetting Radio Stations
Presetting radio stations manually
(Manual Preset)
If you want to preset AM stations or FM radio wave
reception is weak in your area, follow the procedure below
to preset radio stations manually.
MEMORY
Display
1
Tune the radio station you want to preset.
For details, refer to "Tuning Radio Stations"
(page 48).
2
Press MEMORY.
"MEMORY" blinks in the CinemaStation display for
about five seconds.
3
Press A/B/C/D/E to select the preset group
(A to E) to where you want to store the
currently selected station.
Make sure the colon (:) appears in the CinemaStation
display.
C1 FM
Appears
4
Press d PRESET/TUNING u to select the
preset number (1 to 8) to where you want to
store the currently selected station.
5
Press MEMORY.
The CinemaStation applies the selected preset group
and number to the station.
y
• When presetting a radio station, the CinemaStation
automatically sets the reception mode (stereo or monaural) at
the same time.
• If you select a preset number that has been already applied to
other station, it will be replaced with the new station.
• If the MEMORY indicator stops blinking before you perform
step 3 above, Auto Preset is cancelled and you must start the
procedure again.
52
A/B/C/D/E
d PRESET/TUNING u
630
Changing the order of preset radio
stations
Follow the procedure below to change the order of preset
radio stations. In this procedure, we switch the radio
stations preset to E1 and A5 for example.
PRESET/BAND
1
Select the radio station preset to E1.
For details, refer to "Selecting preset radio stations
(Preset Tuning)" (page 49).
2
Press and hold PRESET/BAND for about
three seconds.
"E1" and "MEMORY" blink in the CinemaStation
display.
3
While MEMORY is blinking, press A/B/C/D/E
to select the preset group "A", then press
d PRESET/TUNING u to select the preset
number "5".
"A5" and "MEMORY" blink in the CinemaStation
display.
4
Press PRESET/BAND.
"EDIT E1-A5" appears in the CinemaStation display
and the order of the stations changes.
y
If the MEMORY indicator stops blinking before you perform step
3 above, Auto Preset is cancelled and you must start the
procedure again.
d PRESET/TUNING u