Remote Control In Zone 2 - Yamaha RX-V740 Owner's Manual

Remote Control in Zone 2

You can use the supplied remote control in a second room
(Zone 2), as the Zone 2 remote control. You can select the
input source and control components located in the main
room directly from the second room regardless of the
listening conditions in the main room.
I To enable Zone 2 mode on the remote
control
1
Press CODE SET using a ballpoint pen or
similar object.
"SETUP" and the selected component name appear
alternately in the display window.
2
Press j / i to select "L:AMP".
+
TV VOL
CH CH
TV MUTE
– +
SELECT
PRESET PRESET
TV VOL
–
3
Press u / d to select "ZONE2".
+
TV VOL
CH CH
TV MUTE
+
–
SELECT
PRESET PRESET
TV VOL
–
4
Press CODE SET to complete the Zone 2
setup.
Immediately after you have configured the remote
control for Zone 2, the remote will be to MAIN
mode. When the remote is in MAIN mode, you can
turn the main unit on, or set it in standby mode
independently of the Zone 2 by pressing SYSTEM
POWER or STANDBY ("MAIN" appears on the
display window for 2 seconds.)
I To use the remote control in Zone 2
1
Press SELECT k to display "ZONE2" in the
display window.
2
Press SYSTEM POWER to turn Zone 2 power on.
3
Press an input selector button to select the
input source you want to listen to in the
second room.
The display window shows "2: name of selected
input" if the remote control is in the Zone 2 mode.
A B C
PHONO
V-AUX TUNER MD/CD-R CD
D-TV/CBL VCR 1 VCR2/DVR DVD
Note
• You cannot select VCR 2/DVR as the input source.
ZONE 2 (FOR U.S.A., CANADA AND AUSTRALIA MODELS)
4
You can control the component by using the
component control area buttons.
REC
DISC SKIP
LEVEL
TITLE
TV VOL
TV INPUT
CH
TV MUTE
SELECT
PRESET
TEST
TV VOL
RETURN
HALL JAZZ CLUB
1 2
MUSIC TV
VIDEO THEATER
5 6
/DTS
SUR.
9 10
0
5
Press SELECT k / n to exit from the Zone 2
mode.
Notes
• The MUTE button on the remote control works for the second
room. However Zone 2 volume cannot be adjusted with the remote
control. Use the control on the amplifier in the second room.
• CODE SET, CLEAR and RENAME will not function when
the remote control is set to ZONE 2 mode.
I When you have finished using the unit
To set both the main unit and the Zone 2 in
standby mode
1
Press SELECT n to display "SYSTM" in the
display window.
2
Press STANDBY.
y
• The SYSTEM POWER and STANDBY works differently
depending on the selected mode that appears on the display
window.
LCD Display
"AMP" or name of
MAIN mode
component (ex. DVD)
ZONE2 mode "ZONE2" or "2:name of
component (ex. 2:DVD)"
"SYSTM"
SYSTEM mode
Notes
• To change the remote control to MAIN mode, press SELECT
k / n repeatedly if necessary to display a name of a
component on the display window.
• When the remote control is in SYSTEM mode, pressing any
button other than SYSTEM POWER or STANDBY returns
the remote to the previous mode.
AUDIO
VOL
SET MENU MUTE
MENU
A/B/C/D/E
CH
PRESET
ON SCREEN STEREO
DISPLAY
EFFECT
ROCK ENTER-
CONCERT TAINMENT
3 4
MOVIE MOVIE
THEATER 1 THEATER 2
7 8
NIGHT 6.1/5.1
11 12
+10
CHP/INDEX
SYSTEM POWER/
STANDBY
turn the main unit
on/standby
turn the Zone2 on/
standby
turn both the main
unit and Zone2 on/
standby
53