Presetting Stations - Yamaha RX-V740 Owner's Manual

TUNING

Presetting stations

I Automatically presetting stations (for FM
stations)
You can use the automatic preset tuning feature to store
FM stations. This function enables the unit to
automatically tune in to FM stations with strong signals,
and to store up to 40 (8 stations x 5 groups) of those
stations in order. You can then recall any preset station
easily by selecting the preset number.
INPUT
STANDBY
/ON
INPUT MODE 6CH INPUT
SILENT
SPEAKERS STEREO PROGRAM A/B/C/D/E
A B
EFFECT NEXT
PHONES
1
Press FM/AM to select the FM band.
FM/AM
2
Press TUNING MODE (AUTO/MAN'L MONO)
until the "AUTO" indicator lights up on the
front panel display.
TUNING MODE
AUTO/MANUAL MONO
3
Press and hold MEMORY (MAN'L/AUTO FM)
for at least 3 seconds.
The preset number and the "MEMORY" and
"AUTO" indicators flash. After about 5 seconds,
automatic preset tuning starts, beginning at the
frequency currently displayed and moving toward the
higher frequencies.
VCR2/DVR VCR1 V-AUX
SP
A
A1:FM 89.9 MHz
When automatic preset tuning is completed, the front
panel display shows the frequency of the last preset
station.
34
2 1 3
VOLUME
PRESET/TUNING FM/AM
EDIT
TUNING MODE MEMORY
AUTO/MANUAL MONO MAN`L/AUTO FM
BASS TREBLE
VIDEO AUX
PRESET/TUNING
SET MENU
S VIDEO VIDEO L AUDIO R OPTICAL
AUTO
Lights up
MEMORY
MAN`L/AUTO FM
D-TV/CBL DVD MD/CD-R TUNER
AUTO
MEMORY
Notes
• Any stored station data existing under a preset number is
cleared when you store a new station under that preset number.
• If the number of the received stations does not reach E8,
automatic preset tuning has automatically stopped after
searching all stations.
• Only FM stations with sufficient signal strength are stored
automatically by automatic preset tuning. If the station you
want to store is weak in signal strength, tune in to it manually
in the monaural mode, and store it by following the procedure
described in "Manually presetting stations".
Automatic preset tuning options
You can select the preset number from which this unit
will store FM stations and/or begin tuning toward lower
frequencies. After pressing MEMORY in step 3:
1. Press A/B/C/D/E and PRESET/TUNING l / h to
select the preset number under which the first station
will be stored. Automatic preset tuning will stop when
stations have all been stored up to E8.
2. Press PRESET/TUNING (EDIT) to turn off the colon
(:) and then press PRESET/TUNING l to begin
tuning toward lower frequencies.
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is set in standby mode,
the power cord is disconnected from the AC outlet, or
the power supply is temporarily cut due to power
failure. However, if the power is cut for more than one
week, the preset stations may be cleared. If so, store
the stations again.