Adjustment Of The Center Level; Adjustment Of The Rear Level - Yamaha RX-V592RDS Owner's Manual

Adjustment of the CENTER LEVEL

If desired, you can adjust the sound output level of the center
speaker even if the output level is already set in "SPEAKER
BALANCE ADJUSTMENT" on page 24.
1
Press once or more so that "CENTER" appears on the
display.
DELAY/CENTER
/REAR/SWFR
2
By continuously pressing the "+" or "–" side of the
TIME/LEVEL button, the level value changes continuously.
The value stops changing momentarily at the preset point
(0 dB).
TIME/LEVEL
Control range: MIN, –20 to +10 dB

Adjustment of the REAR LEVEL

If desired, you can adjust the sound output level of the rear
speakers even if the output level is already set in "SPEAKER
BALANCE ADJUSTMENT" on page 24.
1
Press once or more so that "REAR" appears on the display.
DELAY/CENTER
/REAR/SWFR
2
By continuously pressing the "+" or "–" side of the
TIME/LEVEL button, the level value changes continuously.
The value stops changing momentarily at the preset point
(0 dB).
TIME/LEVEL
Control range: MIN, –20 to +10 dB
40
Notes
Adjustable
Notes
Adjustable
RX-V692RDS only
This adjustment can be made only when the digital sound
field program DOLBY PRO LOGIC, DOLBY PRO LOGIC
ENHANCED, 70 mm MOVIE THEATER or TV SPORTS is
selected, or the "6CH" input source mode is selected.
RX-V592RDS only
This adjustment can be made only when the digital sound
field program DOLBY PRO LOGIC or DOLBY PRO LOGIC
ENHANCED is selected, or the "6CH" input source mode is
selected.
Once the output level is adjusted, the level value will be the
same in all the digital sound field programs mentioned
above.
This adjustment can be made only when the built-in digital
sound field processor is on, or the "6CH" input source mode
is selected.
Once the output level is adjusted, the level value will be the
same in all the digital sound field programs.