Adjustment Of Delay Time - Yamaha RX-V592RDS Owner's Manual

Adjustment of DELAY TIME

You can adjust the time difference between the beginning of
the sound from the main speakers and the beginning of the
effect sound from the rear speakers.
The larger the value, the later the effect sound is generated.
This adjustment can be made to all programs individually.
RX-V692RDS
PRO LOGIC : from 15 to 30 milliseconds
(Preset value: 20 milliseconds)
PRO LOGIC : from 15 to 30 milliseconds
ENHANCED (Preset value: 20 milliseconds)
: from 15 to 30 milliseconds
70 mm MOVIE
THEATER (Preset value: 17 milliseconds)
TV SPORTS : from 1 to 50 milliseconds
(Preset value: 20 milliseconds)
STADIUM : from 1 to 50 milliseconds
(Preset value: 45 milliseconds)
DISCO : from 1 to 50 milliseconds
(Preset value: 14 milliseconds)
ROCK CONCERT : from 1 to 50 milliseconds
(Preset value: 22 milliseconds)
JAZZ CLUB : from 1 to 50 milliseconds
(Preset value: 26 milliseconds)
CHURCH : from 1 to 50 milliseconds
(Preset value: 40 milliseconds)
CONCERT HALL : from 1 to 50 milliseconds
(Preset value: 30 milliseconds)
RX-V592RDS
PRO LOGIC : from 15 to 30 milliseconds
(Preset value: 20 milliseconds)
PRO LOGIC : from 15 to 30 milliseconds
ENHANCED (Preset value: 20 milliseconds)
CONCERT VIDEO : from 1 to 100 milliseconds
(Preset value: 28 milliseconds)
MONO MOVIE : from 1 to 100 milliseconds
(Preset value: 20 milliseconds)
STADIUM : from 1 to 50 milliseconds
(Preset value: 45 milliseconds)
DISCO : from 1 to 100 milliseconds
(Preset value: 14 milliseconds)
ROCK CONCERT : from 1 to 100 milliseconds
(Preset value: 17 milliseconds)
CONCERT HALL : from 1 to 100 milliseconds
(Preset value: 30 milliseconds)
Note
The values of the delay time, center level and rear level you set
the last time will remain memorized even when the power of
this unit is off.
However, if the power cord is kept disconnected for more than
one week, these values will be automatically changed back to
the original factory settings.
1
Press once or more so that "DELAY" appears on the
display.
DELAY/CENTER
/REAR/SWFR
2
By continuously pressing the "+" or "–" side of the
TIME/LEVEL button, the value changes continuously.
The value stops changing momentarily at the preset point.
TIME/LEVEL
Notes
Adding too much delay will cause an unnatural effect with
some sources.
When the TIME/LEVEL button is pressed, sound is
momentarily interrupted.
RX-V692RDS
ms
DSP
RX-V592RDS
ms
RX-V692RDS
ms
DSP
Adjustable
RX-V592RDS
ms
41