Yamaha RX-V592RDS Owner's Manual page 47

When the lid is closed, the OPERATION CONTROL keys
substitute for the keys numbered
key on the left illustration. To use these keys, you do not have
to switch the A/B/C switch. The functions which the
OPERATION CONTROL keys carry out are determined by
which input selector key was pressed before you used the
OPERATION CONTROL keys.
Note
When the lid is closed, the EFFECT, MASTER VOLUME,
MUTE, TV and VCR keys will function in the same way as
when the lid is open.
* If the MACRO switch on the side of the remote control
transmitter is set to "OFF", when the lid is closed, the
SYSTEM POWER and OFF keys also will function in the
same way as when the lid is open.
See the table below for a combination of an input selector key and key functions which the OPERATION CONTROL keys carry out.
(Also, refer to the table on page 45.)
Selected input selector
Functions in area A of keys
TAPE
Functions in area A of keys
CD
Functions in area A of keys
TUNER
Functions in area B of keys
VCR
Functions in area B of keys
DVD/LD
Functions in area B of keys
TV/DBS
Functions in area C of keys
Functions in area C of keys
Functions in area C of keys
Pressing the "V-AUX" or "PHONO" input selector key has no effect on the OPERATION CONTROL keys.
Notes
•
If the OPERATION CONTROL keys substitute for keys
which has no function (empty), no command is carried out.
According to your plan, store functions from other remote
control transmitters into an empty area of those keys. (Refer
to page 50 for the learning method.)
1 2 3
, , and the (+10)
Key functions which the OPERATION CONTROL keys carry out
1
(except REC/PAUSE, A/B, DIR A and B)
2
(except STOP, DISC,
3
and
1
(except REC/PAUSE, A/B, DIR A and B)
2
(except STOP, DISC,
3
and
1
(except REC/PAUSE, A/B, DIR A and B)
2
(except STOP, DISC,
3
and
Examples of operations controlled by using the
OPERATION CONTROL keys
To operate a Yamaha CD player
1. Press the "CD" input selector key.
2. Use the OPERATION CONTROL keys. (They carry out the
functions in area A of keys
OPERATION
CONTROL
Skip to
previous track
To operate your VCR
1. Press the "VCR" input selector key.
2. Use the OPERATION CONTROL keys. (They carry out the
functions in area B of keys
with no function. You must store the functions related to
controlling the VCR in area B of keys
OPERATION
CONTROL
Rewind
and
(+10)
and
(+10)
and
(+10)
•
While playing an audio/video unit, if you want to operate
another unit by using the remote control transmitter (for
example, if you want to rewind a tape on your VCR while
listening to a CD), you should open the lid of the remote
control transmitter and use the A/B/C switch and the
corresponding keys.
(If you press an input selector key with the lid closed to
change the functions of the OPERATION CONTROL keys to
the functions for controlling a VCR, the input of currently
playing CD source is canceled.)
2
.)
Play
Skip to next
track
Pause or Stop
1
. This area is originally preset
1
beforehand.)
Play
Fast forward
Pause or Stop
)
)
)
47