Yamaha RX-V592RDS Owner's Manual page 21

For Control of This Unit
1
DELAY/CENTER/REAR/SWFR and TIME/LEVEL +/–
keys
Adjust the delay time (DELAY), the center channel output level
(CENTER), the rear channel output level (REAR) and the
output level to the SUBWOOFER OUTPUT terminal (SWFR).
Select the item which you want to adjust by pressing the
DELAY/CENTER/REAR/SWFR key and adjust its time or level
by pressing the TIME/LEVEL +/– key.
2
Input selector keys
Selects input source.
3
Tuner keys
Controls tuner.
+: Selects higher preset station number.
–: Selects lower preset station number.
A/B/C/D/E: Selects the group (A – E) of preset station
numbers.
4
SLEEP timer key
This key is used to turn the built-in SLEEP timer on and off,
and to set the SLEEP time. (See page 42 for details.)
5
POWER key
Turns the power on/off.
* While the power is on, pressing the POWER key on the
remote control transmitter switches the unit from the power-
on mode to the standby mode, and vice versa. (In the
standby mode, the standby mode indicator on the front panel
is illuminated.)
6
VOLUME +/– keys
Turns the volume level up/down.
7
2CH/6CH selector key
When the TV/DBS or DVD/LD input source is selected,
pressing this key switches the input signals between 2 channel
stereo signals and 6 channel discrete signals. When switched
to "6CH", discrete signals from the unit connected to the 6CH
DISCRETE INPUT DVD/LD TV/DBS terminals of this unit are
selected as the input signals.
8
Program selector keys
PROGRAM:
When the built-in digital sound field processor (including the
Dolby Pro Logic Surround decoder) is on, this key changes the
currently selected DSP program whenever the right or left side
of this key is pressed.
PROLOGIC:
Directly selects the PRO LOGIC program.
ENHANCED:
Directly selects the PRO LOGIC ENHANCED program.
9
EFFECT ON/OFF key
Switches on/off the digital sound field processor (including the
Dolby Pro Logic Surround decoder).
0
TEST key
Used for speaker balance adjustment. (For details, refer to
page 22–24.)
For Other Component Control
Identify the remote control transmitter keys with your
component's keys. If these keys are identical, their functions
will be the same. On each key function, refer to the
corresponding instruction on your component's manual.
1
Tape deck keys
Controls tape deck.
* DIR A, B and A/B are applicable only to double
cassette tape deck.
* For a single cassette deck with automatic reverse
function, pressing DIR A will reverse the direction of
tape running.
2
CD player keys
Controls compact disc player.
* DISC is applicable only to compact disc changer.
21