Tuning Operations - Yamaha RX-V592RDS Owner's Manual

Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is
possible. However, if signals of the station you want to select are weak, you must tune to it manually (MANUAL TUNING).
AUTOMATIC TUNING
1
Select the reception band (FM or AM) confirming it on
the display.
FM/AM
2
TUNING
MODE
AUTO/MAN'L MONO
3
To tune to a higher frequency, press the right side once.
To tune to a lower frequency, press the left side once.
* If the station where tuning search stops is not the desired
one, press again.
* If the tuning search does not stop at the desired station
(because the signals of the station are weak), change to
the MANUAL TUNING method.
28

TUNING OPERATIONS

RX-V692RDS
or
FM AM
RX-V592RDS
or
RX-V692RDS RX-V592RDS
AUTO TUNING AUTO
DOWN TUNING UP
l6
20 l2
28 8
40 4
60 2
0
–dB
1 3 2
MANUAL TUNING
1
Select the reception band (FM or AM) confirming it on
the display.
FM/AM
2
TUNING
MODE
AUTO/MAN'L MONO
3
Tune to a desired station manually.
DOWN TUNING UP
* To continue tuning search, press and hold the button.
Notes
•
If you tune to an FM station manually, it is received in
monaural mode automatically to increase the signal quality.
•
RX-V692RDS only
If an RDS station that employs PS data service is received,
its station name is shown on the display.
•
RX-V592RDS only
When tuned in to a station, the frequency of the received
station is shown on the display. If an RDS station that
employs PS data service is received, the frequency is then
replaced by the station name. Refer to page 34 for details.
RX-V692RDS
or
FM AM
RX-V592RDS
or
Turn "AUTO
(TUNING)" off.