Getting Started - EMPORIA GD61-UK Quick Start Manual

GETT I N G ST AR T ED
> Place the phone
Keep a distance of at least 1 m from the cordless telephone or
electrical appliances to avoid background noise.
> Insert batteries
Open the battery compartment and insert the batteries.
Please pay attention to the polarity. Then close the lid.
After inserting, the time should be displayed on the screen.
A correct display of the state of charge is only possible if the battery is initially fully
charged and then discharged. Place the handset in the charging cradle for 8 hours.
> Phone line cable
Insert the transparent plug into the earphone cord socket ( ) on the
underside of the handset-storage.
The other end in the phone socket:
In Germany in socket F. In Austria in the -socket.
> Plug in the power supply
Insert the plug into the socket ( ) on the back of the device and
the other side in a 220 V power.supply-socket.
> Set display-language
(see page 8)
Change the display language if an incomprehensible language is set.
> Set date & time
(see page 9)
If your service provider have activated caller ID, the time and date of the phone will
be automatically updated by the network as soon as you receive a call. The network
operator sends only month and day, not the year, you must set the year as it is needed to
calculate the day for the timestamp.
> Set dial mode
(see page 9)
Set the dialing mode correctly according to your network operator.
> Screen backlight
The backlight is on when you receive an incoming call, dial or press any key.
It goes off when the phone is not in use.
Notes: The handset is already registered at the base by factory-default. If you have bought
a variant with several handsets, then all handsets are already registered. If nevertheless a
handset should not be registered at the base, register it as described.
(see page 9)
emporia GD61(AB)-UK 3
GD61AB-UK_KA-ENG-V1.indd 3 06.12.19 15:45