Quick Start - Everycom X7 User Manual

QUICK START

1. STARTUP AND SHUTDOWN
* Connect the projector to the DC terminal of the power adapter, and then plug in the power adapter so that the projector is in standby status
when the power light of the projector is on.
STARTUP: Press the power key on the projector or the power key on the remote controller, so that the projector is started to enter working
status when the power light on the projector glitters;
SHUTDOWN: Press the power key on the projector or the power key on the remote controller to shutdown the projector
2. IMAGE FOCUSING
3. KEYSTONE CORRECTION
*This projector comes with 15°Keystone correction and focus function. Please kindly note, you may adjust the focus
wheel (located at front) and keystone correction ring (located at rear) simultaneously until to get crystal clear images
Support @ 1800-121-4480 07