USB1 Focus Y/pb/pr Keystone Left Right On/Off Down Power Input Air Inlet AV in Audio Input USB2 Menu Input Source Lens Speaker Air Outlet Play / Pause On / Off Mute Zoom Flip Flip Zoom Left Right Down Input Source Back Volume- Volume+...
QUICK START *Sold Separately Take off the lens cover Plug the power cord into an outlet. Type-C Lightning Micro USB Connect your device to the projector correctly. Press the power button Select the correct input to turn on the projector. source to project your device.
INPUT SOURCE Press button on the projector or remote to enter the interface of INPUT SOURCE. A. VGA Connection Input Source YPbPr YPbPr HDMI 1 HDMI 1 HDMI 2 HDMI 2 B. USB Connection Input Source YPbPr HDMI 1 HDMI 2 C.
PROJECTOR CONNECTION PROJECTION DISTANCE & SIZE 200" 170" 150" 100" 85" 45" 5.25ft 9.84ft 11.48ft 17.39ft 19.69ft 23.29ft (1.6m) (3m) (3.5m) (5.3m) (6m) (7.1m) The Recommended projection screen is around 85 inches with a projection distance of around 9.84ft. Ambient darkness will improve the clarity of the projected images. Support @+91-9818398143 Support @+91-9818398143 Support @ 1800-121-4480...
PROJECTION METHODS 4 Projection methods: Depending on how you place the projector, you may need to change the projection mode so your images will be projected correctly. 1.1 Factory defaults: The Projector is mounted on the same side of the same side of the screen as the viewer Front Projection 1.2 Rear: The installation position of the projector and the audience are located on the two side of the screen.
Page 9
1.3 Front/Ceiling MEUN Support @ 1800-121-4480...
Page 10
1.4 Front/Ceiling MEUN Support @ 1800-121-4480...
SPECIFICATION Display Light Source 6000 Lumens Resolution Input Signal Native 1280 x 720 576i/720P/1080i/1080P Installation Type Aspect Ratio Front / Rear / Ceiling 4:3/16:9/Auto Focus Keystone Manual Speaker Power Supply 2* 5W / 4ohm AC 100-240V, 50/60Hz 320 x 260 x 120mm 2.56kg (5.6lb) Unit Dimensions Unit Net Weight...
TROUBLESHOOTING GUIDE 1. Blurry Image *Adjust focus ring / keystone *Projector and screen / wall must be in effective distance. 2. Remote Unresponsive *Make sure remote points at IR receiver directly. *Do not cover IR receiver *Try a new pair of AAA batteries 3.
Need help?
Do you have a question about the X9 and is the answer not in the manual?
Questions and answers