Everycom X7 User Manual page 11

1.2 Sound submenu
1.2.1 Operation of the remote controller
Press the key "MENU" on the remote controller to call out the main menu, then press the key "
press the key " " or " " to select the items to be adjusted, and press the key "OK" to enter setting.
1.2.2 Operation of keys on the projector
Press the key "MENU" to call out the main menu, then press the key "V-" or "V+" to enter the image submenu: press the key "CH- or "CH+"
to select the items to be adjusted, and press the key "OK" to enter setting.
In the sound menu, you can set the sound mode, balance, auto volume, surround sound, fiber mode
and EQ of the projector.
1.3 Time submenu
1.3.1 Operation of the remote controller
Press the key "MENU" on the remote controller to call out the main menu, then press the key "
press the key " " or " " to select the items to be adjusted, and press the key "OK" to enter setting.
1.3.2 Operation of keys on the projector
Press the key "MENU" to call out the main menu, then press the key "V-" or "V+" to enter the image submenu: press the key "CH- or "CH+"
to select the items to be adjusted, and press the key "OK" to enter setting.
In the time menu, you can set the time (current time, not stored after shutdown), off time, on time,
sleep time and auto sleep of the projector
Sound Mode
Balance
Auto Volume
Surround Sound
SOUND
Clock
Off Time
On Time
Sleep Timer
Auto Sleep
TIME
" or " " to enter the image submenu:
Standerd
" or " " to enter the image submenu:
Off
Off
Off
Off
Support @ 1800-121-4480 09