Before First Use; Door Bell Transmitter Installation - Westfalia 818214 Instruction Manual

Before first Use

Remove all parts of the unit out of the packaging. Keep packag-
ing materials out of reach of children. There is risk of suffocation!
Door Bell Transmitter
Installation
1. Use a thin and flat object (e.g. a slot headed screwdriver) to
carefully lever off the housing of the door bell transmitter (6)
(see red arrow on the picture above).
2. Insert a new battery of the type A23. Pay attention to the proper
polarity of the battery. The polarity is printed inside the battery
compartment.
3. Use suitable screws, dowels and water-sealing washers/sealing
rings to mount the base plate of the door bell transmitter at the
desired location. Alternatively the transmitter can be stuck to the
desired location using double sided adhesive tape. The arrow on
the base plate has to face up.
4. Push the top part of the transmitter onto the installed base plate.
Make sure it audibly snaps in place.
Using
10