Advertisement

Quick Links

SFN 5011WH
EN Air Cooler
Translation of the original manual
Copyright © 2020, Fast ČR, a.s.
- 1 -
05/2020

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SFN 5011WH and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sencor SFN 5011WH

  • Page 1 SFN 5011WH EN Air Cooler Translation of the original manual Copyright © 2020, Fast ČR, a.s. - 1 - 05/2020...
  • Page 2 Air Cooler Important safety instructions READ CAREFULLY AND STORE FOR FUTURE USE. General warnings ■ This appliance may be used by children 8 years of age and older and by persons with physical or mental impairments or by inexperienced persons, if they are properly supervised or have been informed about how to use the product in a safe manner and understand the potential dangers.
  • Page 3 ■ High levels of moisture may facilitate the growth of biological organisms in the environment. ■ Do not permit the area around the humidifier to become damp or wet. In the event that mist forms of the appliance, set it to a lower power setting. In the event that it is not possible to lower the power of the appliance, use the appliance intermittently.
  • Page 4 SFN 5011WH Copyright © 2020, Fast ČR, a.s. - 4 - 05/2020...
  • Page 5 Copyright © 2020, Fast ČR, a.s. - 5 - 05/2020...
  • Page 6 Copyright © 2020, Fast ČR, a.s. - 6 - 05/2020...
  • Page 7 Default settings: Air Cooler 1) Fan mode set to the lowest speed. (When the appliance is started for the first time, it will first run at medium speed for approximately 3 seconds and then automatically switch to the low speed. If you turn on the appliance from stand-by User's manual mode, it will again start at medium fan speed for approximately 3 seconds and then automatically switch to the low speed, if this speed was set before it was turned off.)
  • Page 8: Remote Control

    ■ The SLEEP mode is a  combination of the NATURAL mode (natural breeze) and Warning: a gradual lowering of the fan speed. When filling the appliance, make sure that the water level reaches at least the minimum water level mark and also that it does no go Fan setting Progression of the SLEEP mode past the maximum mark.
  • Page 9: Technical Specifications

    TECHNICAL SPECIFICATIONS Rated voltage range ......................220–240 V~ Rated frequency..........................50 Hz Rated power input .......................... 45 W Noise level .......................... 45 – 57 dB(A) Fan power input ..........................35.39 W Maximum air flow of the fan ..................1.71 m /min Operation value ......................0.05 (m /min)/W Power consumption in stand-by mode ................

Table of Contents