Portable Air Conditioner Important safety instructions READ CAREFULLY AND STORE FOR FUTURE USE. This symbol indicates that ignoring the instructions may cause death or serious injury. WARNING: To prevent death or injury to the user or other people and property damage, the following instructions must be followed.
Page 3
Before connecting the appliance to a power socket, check that the rated ■ voltage on its rating label matches the electrical voltage in the power socket. The installation must be performed in accordance with the installation ■ instructions. Incorrect installation may cause leakage of water, electric shock or fire.
Page 4
DO NOT adjust the length of the unit´s power cord, do not use extension cord ■ to power the unit. DO NOT plug the unit into the power socket where other electric appliances are ■ already connected. Incorrect choice of supply may cause fire or electric shock. Do not cover the power cord by a carpet.
Page 5
If the unit is turned over while using it, turn it off and immediately unplug it ■ from the power socket. Check it visually if it is not damaged. If you suspect that the unit has been damaged, contact a technician or customer service centre. During the thunderstorm, the power supply must be disconnected in order ■...
Page 6
heaters, cookers or other sources of ignition. The appliance must be stored in such a manner that its mechanical damage ■ is prevented. Persons working with or repairing cooling circuits must have appropriate ■ authorisation issued by an authorised institution that certifies this person’s competence to work with refrigerants in accordance with the specific assessment of the association for this sector.
Portable Air Conditioner User's manual ■ Prior to using this appliance, please read the user’s manual thoroughly, even in cases, when one has already familiarised themselves with previous use of similar types of appliances. Only use the appliance in the manner described in this user’s manual. Keep this user’s manual in a safe place where it can be easily retrieved for future use. ■...
Operating modes 1. Cooling mode ■ Repeatedly press button MODE C13 until the cooling indicator C2 is lit. Use buttons –/+ C10 a C11 to set the desired temperature. You can set the temperature in the range from 18 to 32 °C. ■...
– Auto (automatic speed). Each time the button is pressed, the arrow at the speed bar on the display D1 will switch. ■ For models SAC MT9020C and SAC MT1220C (without the heating function) – the portable air conditioner will start in the fan mode, when the temperature in the room is less than 23 °C, and in the cooling mode when the temperature in the room is higher than 23 °C.
Cleaning the outer case ■ To clean the outer case, use a soft wiping cloth dipped in a solution of lukewarm water and neutral detergent. Then wipe the surface dry. ■ When cleaning it, do not spray the portable air conditioner with water or any other liquid, do not pour water on it or submerge it in water or in any other liquid. ■...
TECHNICAL SPECIFICATIONS SAC MT9020C Power supply..........................................................220–240 V ~ / 50 Hz Cooling power ............................................................9 kBtu / hour Power input ................................................................1,000 W Current consumption ............................................................4.35 A EER cooling factor ................................................................2.6 Dehumidification capacity ..........................................................1 l / hour Capacity of the built-in condensate tank ......................................................0.4 l Refrigerant type and weight ........................................................R290/205 g...
Need help?
Do you have a question about the SAC MT9020C and is the answer not in the manual?
Questions and answers