Tuning Operations - Yamaha R-V702 R-V502 Owner's Manual

Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is
possible. However, if signals of the station you want to select are weak, you must tune to it manually (MANUAL TUNING).
AUTOMATIC TUNING
1
Select the reception band (FM or AM) confirming it on
the display.
FM/AM
2
TUNING
MODE
AUTO/MAN'L MONO
3
To tune to a higher frequency, press the right side once.
To tune to a lower frequency, press the left side once.
* If the station where tuning search stops is not the desired
one, press again.
* If the tuning search does not stop at the desired station
(because the signals of the station are weak), change to
the MANUAL TUNING method.
26

TUNING OPERATIONS

or
AUTO
DOWN TUNING UP
l6
20 l2
28 8
4
40
2
60
0
–dB
1 3 2
MANUAL TUNING
1
Select the reception band (FM or AM) confirming it on
the display.
FM/AM
2
TUNING
MODE
AUTO/MAN'L MONO
3
Tune to a desired station manually.
DOWN TUNING UP
* To continue tuning search, press and hold the button.
Note
If you tune to an FM station manually, it is received in monaural
mode automatically to increase the signal quality.
or
Turn "AUTO" off.