Connecting Speakers - Yamaha R-V702 R-V502 Owner's Manual

CONNECTING SPEAKERS

Center speaker
Right
Main speakers A
Note
Use speakers with the specified impedance shown on the rear
of this unit.
Note on main speaker connections:
One or two speaker systems can be connected to this unit. If
you use only one speaker system, connect it to either the
SPEAKERS A or B terminals.
Note on a subwoofer connection:
You may wish to add a subwoofer to reinforce low frequencies.
Connect the SUBWOOFER OUTPUT terminal of this unit to
the INPUT terminal of the subwoofer amplifier, and connect the
speaker terminals of the subwoofer amplifier to the subwoofer.
With some subwoofers, including the Yamaha Active Servo
Processing Subwoofer System, the amplifier and subwoofer
are in the same unit.
10
Rear speaker Rear speaker
Right
REAR
CENTER
C D
DUAL
SINGLE
Left
MAIN
CAUTION
SEE INSTRUCTION MANUAL FOR CORRECT SETTING.
SPEAKERS
Subwoofer system
Left
(U.S.A. model)
IMPEDANCE SELECTOR
OUTPUT REAR
CENTER SINGLE:6 MIN./SPEAKER
DUAL:3 MIN./SPEAKER
MAIN A OR B:4 MIN./SPEAKER
CENTER
A B:8 MIN./SPEAKER
REAR
CENTER SINGLE:8 MIN./SPEAKER
DUAL:4 MIN./SPEAKER
MAIN A OR B:8 MIN./SPEAKER
A B:I6 MIN./SPEAKER
SUB
WOOFER
A
Left
B
Note on center speaker connection:
One or two center speakers can be connected to this unit. If
you cannot place the center speaker on or under the TV, it is
recommended to use two center speakers and place them on
both sides of the TV to orient the center sound at the center
position. For connecting two center speakers, follow the
method shown below.
REAR
CENTER
Center speaker
6 MIN./SPEAKER
8 MIN./SPEAKER
Main speakers B
Right
C D
DUAL
SINGLE
Center speaker