Display Panel - Yamaha R-V702 R-V502 Owner's Manual

DISPLAY PANEL

PRESET
MEMORY AUTO
8
1
Multi-information display
Displays various information, for example station frequency,
preset station number and name of selected input source.
2
STEREO indicator
Lights up when an FM stereo broadcast with sufficient signal
strength is received.
3
Signal-level meter
Indicates the signal level of the received station.
If multipath interference is detected, the indication decreases.
4
SLEEP indicator
Lights up while the built-in SLEEP timer is functioning.
5
Center channel mode indicators
The name of a selected center channel mode lights up only
when a program which uses the Dolby Pro Logic Surround
decoder is selected.
6
EFFECT OFF indicator
Lights up if neither the digital sound field processor nor the
Dolby Pro Logic Surround decoder is on. In this state, sound
output is 2-channel stereo.
7
AUTO indicator
Lights up when this unit is in the automatic tuning mode.
8
MEMORY indicator
When the MEMORY button is pressed, this indicator flashes
for about 5 seconds. During this period, the displayed station
can be programmed to the memory by using the A/B/C/D/E
button and the preset station number selector buttons.
1
TAPE MON
7 9
2 3
SLEEP
STEREO
ms dB
kHz
MHz
0 20 l00
PRO LOGIC CONCERT MONO DISCO
ENHANCED VIDEO MOVIE STADIUM
0
9
TAPE MON indicator
Lights up when the tape deck (or MD recorder etc.) is selected
as the input source by pressing the TAPE (MD) MONITOR
button.
0
DSP program indicators
The name of a selected DSP program lights up when the built-
in digital sound field processor and/or the Dolby Pro Logic
Surround decoder is on.
4
5 6
NORM
WIDE
PHANTOM
EFFECT OFF
ROCK CONCERT
CONCERT HALL
17