Using Your Headphones; Muting The Audio Output; Playing Video Sources In The Background Of An Audio Source; Displaying The Input Source Information - Yamaha HTR-6060 Owner's Manual

Playback

Using your headphones

Connect a pair of headphones with a stereo
analog audio cable plug to the PHONES jack on
the front panel.
EDIT
SEARCH MODE CATEGORY
SPEAKERS PRESET/TUNING FM/AM A/B/C/D/E
1
PROGRAM
MAIN ZONE
PHONES TONE CONTROL STRAIGHT
ON/OFF
SILENT CINEMA EFFECT
y
When you select a sound field program, SILENT CINEMA mode
activates automatically (see page 46).
Notes
• When you connect headphones, no signals are output at the
speaker terminals.
• All Dolby Digital and DTS audio signals are mixed down to the
left and right headphone channels.

Muting the audio output

Press L MUTE on the remote control to mute the
audio output. Press L MUTE again to resume
the audio output.
y
• You can also rotate 0 VOLUME on the front panel or press
J VOLUME +/– to resume the audio output.
• You can adjust the muting level by using the "MUTE TYPE"
parameter in "SOUND MENU" (see page 76).
• The MUTE indicator flashes in the front panel display when the
audio output is muted and disappears from the front panel
display when the audio output is resumed.
40
En
VOLUME
DISPLAY
PRESET/TUNING/CH MEMORY TUNING AUTO/MAN'L NIGHT SLEEP
SCENE
2 3 4
INPUT
VIDEO AUX
PURE DIRECT AUDIO SELECT OPTIMIZER MIC
S VIDEO VIDEO L AUDIO R
Playing video sources in the
background of an audio source
You can combine a video image from a video source with
sound from an audio source. For example, you can enjoy
listening to classical music while viewing beautiful
scenery from the video source on the video monitor.
Press the input selector buttons ( A ) on the
remote control to select a video source and then
an audio source.
OPTICAL
Audio sources
Video sources
y
Set the "BGV" parameter in the "MULTI CH SET" menu to the
desired setting to select the default background video input source
of the MULTI CH INPUT sources (see page 80).
Displaying the input source
information
You can display the format, sampling frequency, channel,
bit rate and flag data of the current input signal.
Set the operation mode selector to K AMP
1
and then press N SET MENU on the remote
control.
The top "SET MENU" display appears in the OSD.
2
Press D n repeatedly to select "SIGNAL
INFO" and then press D ENTER.
The audio information about the input source appears
in the OSD.
3
Press D l / h to toggle between the audio
and video information displays.
MD MULTI CH IN
CD CD-R
CBL
DVD DTV TUNER
DOCK
V-AUX DVR VCR
SET MENU
. ;AUTO SETUP
;MANUAL SETUP
.A;SIGNAL INFO
[ ]/[ ]:Up/Down
[ENTER]:Enter
XM
PHONO