Information On Hdmi - Yamaha HTR-6060 Owner's Manual

Connections

Information on HDMI™

■ HDMI compatibility with this unit
Audio signal Audio signal
types formats
2ch Linear PCM 2ch, 32-192 kHz,
16/20/24 bit
Multi-ch Linear 8ch, 32-192 kHz,
PCM 16/20/24 bit
DSD 2/5.1ch, 2.8224
MHz, 1 bit
Bitstream Dolby Digital, DTS
This unit's HDMI interface is based on the following
standards:
• HDMI Version 1.2a (High-Definition Multimedia
Interface Specification Version 1.2a) licensed by
HDMI Licensing, LLC.
• HDCP Revision 1.1 (High-bandwidth Digital
Content Protection System Revision 1.1) licensed
by Digital Content Protection, LLC.
Notes
• When CPPM copy-protected DVD audio is played back, video
and audio signals may not be output depending on the type of
the DVD player.
• This unit is not compatible with HDCP-incompatible HDMI or
DVI components.
• You can check the potential problem about the HDMI
connection (see page 41).
16
En
■ HDMI jack and cable plug
Compatible
HDMI
HDMI
components
CD, DVD-Video,
DVD-Audio, etc.
DVD-Audio, etc.
y
• We recommend using an HDMI cable shorter than 5 meters (16
SACD, etc.
feet) with the HDMI logo printed on it.
• Use a conversion cable (HDMI jack
DVD-Video, etc.
this unit to other DVI components.
Notes
• Do not disconnect or connect the cable or turn off the power of
the HDMI components connected to the HDMI OUT jack of
this unit while data is being transferred. Doing so may disrupt
playback or cause noise.
• Audio signals input at input jacks other than the HDMI IN 1 or
HDMI IN 2 jack of this unit cannot be digitally output at the
HDMI OUT jack.
• If you turn off the power of the video monitor connected to the
HDMI OUT jack via a DVI connection, this unit may fail to
establish the connection to the component.
HDMI cable plug
↔
DVI-D jack) to connect