Connecting A Tv Monitor Or Projector - Yamaha HTR-6060 Owner's Manual

Connections

Connecting a TV monitor or projector

Connect your TV (or projector) to the HDMI OUT jack,
the COMPONENT VIDEO MONITOR OUT jacks, the S
VIDEO MONITOR OUT jack or the VIDEO MONITOR
OUT jack of this unit.
Make sure that this unit and other
components are unplugged from the
AC wall outlets.
y
You can choose to play back HDMI audio signals on this unit or
on another HDMI component connected to the HDMI OUT jack
of this unit. Use the "SUPPORT AUDIO" parameter in "SOUND
MENU" to select the component to play back HDMI audio
signals (see page 77).
indicates recommended connections
indicates alternative connections
18
En
Notes
• Some video monitors connected to this unit via a DVI
• When you connect your TV monitor or projector via HDMI
• Connect the input source components to the HDMI IN 1 or
HDMI
OUT
P
R
HDMI in
TV (or projector)
connection fail to recognize the HDMI audio/video signals
being input if they are in the standby mode. In this case, the
HDMI indicator flashes irregularly.
connection, the OSD does not appear. In such cases, connect the
TV monitor or projector via component, S-video or video
connection.
HDMI IN 2 jack to display the video images on the video
monitor connected to the HDMI OUT jack.
VIDEO
VIDEO
S VIDEO
COMPONENT VIDEO
P P Y
R B
MONITOR OUT
P Y
B
Component video in
S-video in
Video in
MONITOR
OUT
S V