Position - hopf Elektronik GmbH 7001GPS Technical Manual

Satellite clock system with control board 7020gps
Table of Contents

Advertisement

K
EYPAD

4.3.4 Position

Valid for all GPS systems
Selection frame:
Position LAT N/S LON E/W Y/N
(N)orth (S)outh (E)ast (W)est
With this function the geographic location of the equipment is entered when synchronisation
is via GPS. This function is useful when first commissioning, it shortens the re-initialisation of
the GPS receiver. Input can be in very rough steps. An exact degree setting is not neces-
sary.
Input frame:
LAT/LON P GG.MM p GGG.MM P=N/S p=E/W
- >_ .
The input of latitude and longitude is in degrees and minutes.
The symbol for latitude is:
N
S
and for longitude:
E
W
First the latitude is entered under P GG.MM:
P
GG
MM
The longitude is entered under p GGG.MM:
p
GGG
MM
7001GPS Satellite Clock System - V08.00
hopf Elektronik GmbH
Nottebohmstr. 41 • D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: info@hopf.com
<-- > . <-
northern hemisphere
southern hemisphere
east of the Greenwich Meridian
west of the Greenwich Meridian
N or S, North or South
latitude, degrees, from 00 - 89
latitude, minutes, from 00 - 59
E or W, East or West
longitude, degrees, from 000 - 179
longitude, minutes, from 00 - 59
17 / 44

Advertisement

Table of Contents
loading

Table of Contents