Channel Installation Wizard; Install Rf Channels - Philips HFL4014 Series Installation Manual

6.20 Channel installation wizard

6.20.1

Install RF channels

To install channels you have to go to the [Professional Settings] [Channels] [RF Channel Installation]
menu. In this menu you can go to [Search for Channels] or do a [Digital: Manual Installation] or do an
[Analogue: Manual Installation].
Using the [Search for Channels] you will be able to do a full channel installation. You will get below
screens after starting the installation.
Note: Some screens will be shown depending on your settings or selections made, some screens will not
be shown. Also the content of the screens is depending on your selections
Note: Both SPTS and MPTS (Single and Multiple Program Transport Stream) are supported
o You can [Start now] to start the
installation or [Cancel] to exit back to TV
last status
- 68 -