Smartinfo - Philips HFL4014 Series Installation Manual

6.8.2

SmartInfo

See also more details in the chapter "Guest Menu - SmartInfo"
o Navigate to the [SmartInfo] [Mode] menu
Note:
accessible when [Dashboard]
[Select Dashboard] is set to
[Philips Home]
o You will see below items:
o [Off]: Disable Smart Info feature
o [Browser]: Use the SmartInfo browser,
usually this is created in CMND
o Navigate to the [SmartInfo] [Browser
settings] menu
Note: [Brower settings] is only
accessible when [Mode] is set to
[Browser]
o You will see below items:
o [Source]: You can set the source of the
browser to [USB], [Server] or [Local]
o [Server URL]: You can set the server
address where the browser is hosted
Note: Normally you load the
SmartInfo into the clone file
and load it locally in the TV,
therefore you need to set [Source] to
[Local]
Note: If set to [USB], the TV
will read from the folder
MasterCloneData/SmartInfoBrowser/
- 33 -
[SmartInfo] is only
TPM187HE_CloneData/