Philips HFL4014 Series Installation Manual page 53

[Easylink Autostart] or you can disable
the speakers using [Off]
Note: The audio system (supporting
ARC) must be connected via HDMI
o [Headphone/Bathroom speakers]: No
audio will
Headphone/Bathroom speakers when
[Off], it will be heard when [On] and a
device is connected
o [Headphone/Bathroom
Vol]: When [On], the volume level of
the Headphone/Bathroom speaker
will be fixed to the Switch on Setting
o [Headphone Detection]: When the
Headphone Detection is set to [On]
and the headphone is connected then
TV speakers
automatically. When [Off], the guest
has to manually mute the TV speakers
o Navigate to the [Sound] [TV Placement]
menu
o You will see [On the Wall] and [On a
stand]. Depending on your selection you
will optimize the sound acoustics of the
TV for the placement of your TV
o Navigate to the [Sound] [Advanced]
menu
o You will see below items:
o [Surround Mode]: Select the sound
effect for the internal TV, you can
choose [Stereo] or [DTS TruSurround]
o [Auto volume]: Select [AVL] or [Night
mode] if you want to enable to level
out sudden volume differences or [Off]
if you want to disable
o [Clear Sound]: Select if you want to
enable Clear Sound to improve the
sound for speech [On] or [Off] if you
want to disable
o [Audio Out Format]: Set the audio out
signal of the TV to fit with the sound
capabilities of the connected Home
Theatre
(uncompressed)],
[Multichannel (bypass)] or [Dolby
Digital Plus]
o [Audio Out Leveling]: Select the level
out of the volume of the Home Theatre
System and the TV when switching
- 52 -
be played via
Spk Fixed
shall be muted
System to [Stereo
[Multichannel],
the