Philips HFL4014 Series Installation Manual page 21

o After the software upgrade, the TV will reboot and will go again to the cloning screen
where the clone file from the USB stick will be loaded in TV
Note: First, you will see "Downloading"; once downloaded you will see a message that
you can remove the USB stick:
o If you don't press "OK" once processing is done, the TV will go to standby after 30
minutes. You can press "OK" to close the overview screen, the installation is done and
you can start using the TV.
If a clone file and/or software is sent out over IP or RF the same process will happen automatically.
- 20 -