Table of Contents
Advertisement
5. Channel
Installation
5.1. First Time to Install
Channels
Install channels during the first TV installation
On the first TV installation, you can follow on-screen
instructions to set the menu language, network
connection, sign in Google account, select your country
and complete other basic settings for the TV. Moreover,
you can also install channels during the first TV
installation.
To install channels during the first TV installation:
1 - The first TV installation starts from Welcome screen
with language setting options, follow on-screen
instruction to complete multiple TV settings until the
channel installation part.
2 - Follow on-screen instructions to complete the
channel installation.
For more details about channel installation, please refer
to respective installation instruction sections.
5.2. Antenna Installation
To install Antenna channels:
1 - Press Settings > Channels &
Inputs > Channels > Antenna.
2 - Select Channel Scan and press OK.
Alternatively, while watching a TV channel, you can
perform the channel scan by...
MENU > Navigation Keys up > Channels
5.3. Update Channels
Manual Channel Update
You can always start a channel update yourself.
To start a channel update manually:
1 - Press Settings > Channels & Inputs > Channels and
press OK.
2 - Enter your PIN code if necessary.
3 - Select one of below options.
Channel Scan - this kind of scan will auto install digital
channels or analogue channels depending on your
current TV source setting.
Update Scan - refers to an incremental scan, which only
scans the frequencies that Channel Scan has not
scanned.
Single RF Scan - is digital manual scan, this allow user to
scan specific frequency by pressing left or right
Navigation Key on the RF Channel item.
Manual Service Update - is used to start background
scan that new channels can be scanned without
changing the existing channels.
4 - The channel scan will start immediately. This can take
a few minutes to complete the channel update.
5 - Press Back, repeatedly if necessary, to close the menu.
5.4. Reception Quality
You can check the quality and signal strength of a digital
channel. If you have your own antenna, you can
reposition the antenna to try and improve the reception.
To check the reception quality of a digital channel:
1 - Press Settings > Channels & Inputs > Channels >
Antenna > Single RF Scan and press OK.
2 - Select RF Channel.
3 - Press Navigation keys left or right to select a
channel and press OK. The signal level and signal quality
is shown for this channel.
4 - Press Back, repeatedly if necessary, to close the menu.
5.5. LCN - Logical Channel
Number
To switch on/off the LCN:
1 - Press Settings > Channels & Inputs > Channels >
Antenna and press OK.
2 - Select LCN and press OK.
3 - Select On or Off and press OK.
4 - Press Back, repeatedly if necessary, to close the menu.
5.6. Channel Scan or Store
Type
You can set the channel type for scanned or stored.
To set the channel scan type:
1 - Press Settings > Channels & Inputs > Channels >
Antenna and press OK.
12
Advertisement
Table of Contents
