Localcustomdashboard In The Clone File; Capture Logs From Tv On Usb - Philips HFL4014 Series Installation Manual

10.4 LocalCustomDashboard in the clone file

After you have set your settings correctly you can clone TV to USB to add your local custom dashboard.
The folder name used in the root of the USB device containing the clone data:
TPM187HE_CloneData/MasterCloneData/
Go to the local custom dashboard via .../MasterCloneData/LocalCustomDashboard/
In the [Professional Settings], when [Dashboard][Select Dashboard] is set to [Custom Dashboard
(Browser Based)] you can set [Source] to [Local]. In this case the TV shall load the custom dashboard
from the flash memory if available.
By default the TV shall not have any pages in the flash when coming out of factory.
If in the [Professional Settings], [Dashboard][Fallback] is set to [Off], then the TV shall fall back to the
default dashboard if there is no network connection to the server.
If it is set to [On], the LocalCDB will be loaded when Server cannot be reached.
If in the [Professional Settings], [Dashboard][Select Dashboard][Custom Dashboard (Browser
Based)][Source] is set to [Server] and the TV is unable to connect to the configured server then it shall
fall back to the custom dashboard stored locally, [Dashboard][Fallback] is set to [On] along with valid
fallback files.
You need to make sure that the files in the /LocalCustomDashboard/ folder are HTML5 compliant along
with the JAPIT WIXP plugin.

10.5 Capture logs from TV on USB

Sometimes if you would have a problem, it can be requested by the technical team to share a clone
file and logs of the issue you have reported.
To make logs you need to do following steps:

Create a new text file on a FAT32 formatted USB stick

Rename the "New Text Document.txt" file to "enable_log2usb " (without any ending, even not
.txt)

Connect the USB to TV

Reproduce the problem you have

Send 456789 i+ (notification should be seen that it's save to disconnect the USB), in case you
do not have a RC with digits you put the TV to STBY and power off the TV

After reproduction is done, disconnect the USB stick again from TV and zip the " text file"
added to the USB stick and share it with the technical team
- 84 -