Summary of Contents for Happybeds Pembroke 3+2 Drawer Chest
Page 1
Assembly Instructions Pembroke 3+2 Drawer Chest Important before assembly: Read these instructions carefully before assembling or using the product. Please check the contents of the boxes before attempting to assemble this product. The instructions will have a checklist of parts and fittings.
Page 2
Never drag or push the pieces across a hard or stone floor as this will cause damage to the joints. Use a carpet or a rug for extra care. If you have problems assembling or have damaged or missing pieces, please contact us by visiting: https://www.happybeds.co.uk/customer-service...
Vendor: S000238 PARTS LIST HARDWARE LIST Part Item Part Item Top Panel Wooden dowel Right Panel 14mm Screw Left Panel 30mm Screw Front Side Column 18mm Screw Back Side Column Division Panel 60mm superb bar Front Cross Member Smooth shell pull Side Slide Washer Central Slide...
Page 5
Insert the hardware (A) in the parts shown. STEP 1: Vendor: S000238 Do NOT use any power tools are this may damage the frame and will invalidade any claim. Fix the right panel (2) and the left panel (3) onto the front side column (4) and the back side column (5) STEP 2: using hardware ( ).
Page 6
Insert hardware ( ) to the foot ( ). Insert the foot into the right panel (2) STEP 3: Vendor: S000238 and the left panel (3). Do NOT use any power tools are this may damage the frame and will invalidade any claim. Attach the division panel (6) to the top panel (1) using hardware (C).
Page 7
Vendor: S000238 Fix the front cross member (7), the lower rear cross member (11) STEP 5: and the upper rear cross member (10) onto the assembled right panel (2) and left panel (3) using hardware (c). Do NOT use any power tools are this may damage the frame and will invalidade any claim. Attach the assembled frame to top panel (1) using hardware (c).
Page 8
STEP 7: Attach the side slide (8) and central slide (9) into the side of furniture using hardware (C). Vendor: S000238 Do NOT use any power tools are this may damage the frame and will invalidade any claim. Attention: correct slide position Fix the left rear panel (12) and right rear panel (13) with the H profile (14) using hardware (J).
Page 9
Fix the left side drawer (17) and the right side drawer (16) into the drawer front (15) STEP 9: Vendor: S000238 using hardware ( ). Insert the drawer background (19) between the left and right side drawers (17) and (16). Fix the larger drawer back (18) to the left and right side drawers (17) and (16) using hardware ( ).
Page 10
Step 11 : The chest needs to be fixed to the wall. Vendor: S000238 Fix the wall strap (I) to the wall using washer (H) and a screw (not provided). Insert wall strap through the hole in the back part of the furniture and fix onto the top panel using washer (H) and 14mm Screw (B).
Page 11
Vendor: S000238 Step 13: Insert the drawers as shown using hardware (A). Do NOT use any power tools are this may damage the frame and will invalidade any claim.
Page 12
floor as this will cause damage to the joints and could result in failure to the product that will invalidate the warranty. For more information on cleaning and product care visit: https://www.happybeds.co.uk/help-and-advice Notes We’ve tried to make this product as easy to assemble as possible. In the unlikely event that...