Table of Contents
Advertisement
Remote Control
This section describes basic operation of this unit with the
remote control. First, press AMP(TUNER) on the
component selector. Refer to "PRESET REMOTE
CONTROL" on page 43 for full details.
1
2
3
4
5
6
7
8
9
0
1
Indicator
This flashes in red when pressing a button on the remote
control. If it flashes rapidly several times, press the selected
button again.
2
Component selector buttons
Press one of these buttons which corresponds to the
component you want to control with the remote control.
(The proper code must be set for your component. Refer to
"Setup codes" on page 48.) When the component selector
button has been pressed, the remote control is set to that
component operation mode.
Press AMP(TUNER).
q
w
TV VOLUME
TV INPUT
e
r
3
POWER
Each time you press this button, the unit switches between
the power on and standby mode.
4
TEST
Press this button to output the test tone for each speaker.
5
A/B/C/D/E, PRESET +/–
These buttons are used to select a preset station.
A/B/C/D/E:
To select one of a group (A to E) of preset
stations
PRESET +/–: To select a preset station number (1 to 8)
6
MUTE
Press this button to mute the sound. To cancel mute, press
this button again.
7
VOLUME
These buttons are used to adjust the volume level.
u: To turn up the volume
d: To turn down the volume
8
SLEEP
Press this button to set the SLEEP timer.
9
+/–
These buttons adjust the settings of the SET MENU and
TIME/LEVEL mode.
0
TIME/LEVEL
Press this button to select the items in the TIME/LEVEL
mode.
q
Input selector buttons
These buttons select the input source.
CD:
To play a CD
TUNER:
To listen to an FM (RDS) or AM broadcast
TAPE/MD:
To play a tape or MD
DVD/LD:
To play a DVD or LD
SAT/D-TV:
To watch a TV or satellite broadcast
VCR:
To play a video cassette
PHONO:
To play an analog record
V-AUX:
To use a camcorder
EXT. DEC.:
To play other multi-channel source
w
EFFECT
Press this button to turn on or off the effect speakers (center
and rear).
e
PRG+, PRG–
Press these buttons to select a DSP program.
r
SET MENU
Press this button to select the items in the SET MENU.
CONTROLS AND FUNCTIONS
7
Advertisement
Table of Contents
Troubleshooting
