Delay Time And Speaker Output Levels - Yamaha HTR-5240RDS Owner's Manual

Adjusting Method
Adjustments should be performed with the remote control
while watching the information on the display.
1
1
Press AMP(TUNER) on the
component selector.
2
Press TIME/LEVEL repeatedly to select the
item you want to adjust.
Each time you press TIME/LEVEL, the selected item
changes and appears on the display as below.
Note
• Depending on the setting of the SET MENU, you may not be able
to select all these items.
3
Press + or – to adjust the
delay time or speaker
output levels.
4
Repeat steps 2 and 3 to adjust the settings of
any other item.
Memory back-up
The memory back-up circuit prevents the stored data
3
from being lost when this unit is set in the standby mode.
If, however, the power cord is disconnected from the AC
2
power outlet or the power is cut for more than one week,
the latest values for the delay time and the center/rear/
subwoofer output levels that were set will automatically
return to the preset values. If so, adjust the delay time
and output levels again.
D E L A Y
C E N T E R
R S U R .
L S U R .
S W F R

DELAY TIME AND SPEAKER OUTPUT LEVELS

41