Table of Contents
Advertisement
BASIC OPERATION
When using the remote control, press AMP(TUNER) on
the component selector.
2
–
+
–
+
7
6
3
2
4
1
Set VOLUME to the "m"
position.
2
Turn the power on.
Front panel
3
Press SPEAKERS A or B
to select the main
speakers to be used.
If you use two main speaker
systems, press both A and B.
20
PLAYING A SOURCE
4
L
R
6
7
Front panel
or
Remote control
Front panel
4
Select the desired input
source with INPUT
SELECTOR (or the input
selector buttons). (Turn on
1,6
the TV monitor for video
sources.)
The name of the selected input
source appears for a moment
and the arrow for the selected
input source indicator lights up
on the display.
Input source
a.
To select a tape or an MD source
Press TAPE/MD MON / EXT.
DECODER (or TAPE/MD) so
that the "TAPE/MD
MONITOR" indicator lights up
on the display.
b. To select a source connected to the
EXTERNAL DECODER INPUT terminals
Press TAPE/MD MON / EXT. DECODER repeatedly
(or EXT. DEC.) until "EXT. DECODER" appears on
the display.
Notes
• An audio source can not be played if the "TAPE/MD MONITOR"
indicator lights up or if "EXT. DECODER" appears. Press TAPE/
MD MON / EXT. DECODER twice (or TAPE/MD once) to turn
off the "TAPE/MD MONITOR" indicator. Press TAPE/MD
MON / EXT. DECODER once (or EXT. DEC.) to turn off "EXT.
DECODER".
• If you select and play a video source when the "TAPE/MD
MONITOR" indicator lights up or "EXT. DECODER" appears,
the play back result will be a video image from the video source
and the sound from the audio source selected by using TAPE/MD
MON / EXT. DECODER (or TAPE/MD or EXT. DEC.).
y
For the DVD/LD, TV/digital TV and satellite tuner sources, the
current input mode is also shown. Refer to page 22 for details about
the input mode.
Front panel
or
Remote control
Front panel
Advertisement
Table of Contents
Troubleshooting
