Sleep Timer - Yamaha HTR-5240RDS Owner's Manual

The SLEEP timer can be used to automatically set this unit
in the standby mode. This timer is useful when you are
going to sleep while enjoying a broadcast or other desired
input source. The SLEEP timer can only be set with the
remote control.
Notes
• First press AMP(TUNER), TAPE/MD, CD or DVD/LD on the
component selector to set the SLEEP timer for this unit.
• The SLEEP timer is effective for the components connected to the
AC OUTLET(S) on the rear panel of this unit.
Setting the SLEEP Timer
1
Play a source you want to enjoy when you are
going to sleep.
2
Press SLEEP repeatedly to
select the desired SLEEP
time.
Each time you press SLEEP, the
SLEEP time will change as
below:
120
The SLEEP timer is off
(SLEEP OFF).
(This is the state before
SLEEP is pressed.)
3
The "SLEEP" indicator soon lights up on the
display after the SLEEP timer has been set.
The display returns to the previous indication.
42
90 60 30
Flashes
Lights up

SLEEP TIMER

Canceling the Selected SLEEP
Timer
Press SLEEP repeatedly until "SLEEP OFF"
appears on the display.
It will soon disappear and the "SLEEP" indicator will
go off.
Note
• The SLEEP timer can also be canceled by setting the unit in the
standby mode by using POWER on the remote control (or
STANDBY/ON), or by disconnecting the AC power cord from
the AC power outlet.