Yamaha HTR-5240RDS Owner's Manual page 51

Returning to the factory-set codes
To return all components to the factory-set codes, follow
these steps.
1
Press one of the
component selector
buttons other than
AMP(TUNER).
2
Press both VOLUME
buttons (u/d) at the same
time for about four
seconds.
The indicator flashes twice.
3
Enter the code number
"9990".
Make sure that the indicator
flashes twice.
To return each component to the factory-set codes, follow
these steps.
1
Press one of the
component selector
buttons which
corresponds to the
component to be returned
to the factory-set code.
2
Press both VOLUME
buttons (u/d) at the same
time for about four
seconds.
The indicator flashes twice.
3
Enter the code number
"0000".
Make sure that the indicator
flashes twice.
The following codes are factory set.
Component
Component
selector button
TV TV
CBL/SAT Satellite tuner 0006
VCR VCR
DVD/LD DVD player
CD CD player
TAPE/MD Tape deck
We recommend that you write all the code numbers you
have set on the "Quick Reference Card".
PRESET REMOTE CONTROL
Code
0101
0002
0008 (YAMAHA DVD player)
0005 (YAMAHA CD player)
0004 (YAMAHA Tape deck)
49