Table of Contents
Advertisement
CONNECTIONS
S VIDEO terminals
DVD/LD player
TV Monitor
S VIDEO OUT
S
S VIDEO
S VIDEO IN
OUT
VCR
VIDEO AUX terminals (on the front panel)
V
L
R
AUDIO OUT R
AUDIO OUT L
VIDEO OUT
Connecting to an External Decoder
External decoder
MAIN
SURROUND
OUT
OUT
L
R
L
R
14
S VIDEO IN
S
S Video signal
S
Signal flow
Camcorder
CENTER
SUBWOOFER
OUT
OUT
(Europe model)
If your VCR, TV monitor or DVD/LD player has "S" (high-
resolution) video terminals, they can be connected to this
unit's S VIDEO terminals. Connect the VCR's "S" video
input and output terminals to this unit's S VIDEO VCR
OUT and IN terminals, respectively. Connect the monitor's
"S" video input terminal to this unit's S VIDEO MONITOR
OUT terminal. Connect the DVD/LD player's "S" video
output terminal to this unit's S VIDEO DVD/LD terminal.
Otherwise, connect the composite video terminals of your
VCR, TV monitor or DVD/LD player to this unit's
composite video terminals.
Notes
• Use a special S VIDEO cable (commercially available) for the S
VIDEO connection.
• If video signals are input from both the S VIDEO input and
composite input terminals, the signals will be directed to their
respective output terminals.
These terminals are used to connect any video input source
such as a camcorder to this unit.
This unit has additional 6-channel audio signal input
terminals for connecting an external decoder to this unit.
Connect the 6-channel audio signal output terminals of the
decoder to the EXTERNAL DECODER INPUT terminals
of this unit.
Notes
• When a source connected to these terminals is selected, the digital
sound field processor cannot be used.
• The settings of "CENTER SP", "REAR SP", "MAIN SP" and
"BASS OUT" in the SET MENU have no effect on a source
connected to these terminals. The setting of "MAIN LVL" is
effective. (Refer to pages 37 and 38 for details.)
Advertisement
Table of Contents
Troubleshooting
