Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Helmholz FLEXtra
Summary of Contents for Helmholz FLEXtra
- Page 1 Quick Start Guide Version FLEXtra PROFINET switch 16 Port, 10/100/1000MBit Order number: 700-855-16P01 Helmholz GmbH & Co. KG | Hannberger Weg 2 | 91091 Großenseebach | Germany 17.09.2020 Phone +49 9135 7380-0 | Fax +49 9135 7380-110 | info@helmholz.de | www.helmholz.de...
-
Page 2: Table Of Contents
The consequences of improper use may include personal injury to the user or third parties, as well as property damage to the control system, the product, or the environment. Use the device only as intended!. Quickstart Guide FLEXtra PROFINET-Switch | Version 1 | 17.09.2020... -
Page 3: Introduction
3 Preparing the PROFINET-Switch 3.1 Connecting The FLEXtra PROFINET switch has a redundant power supply. The FLEXtra PROFINET switch must be supplied with 24 VDC via the supplied connector plug at at least one of the two "-/+" wide-range inputs (18 - 30 VDC). -
Page 4: Setup And Use
4 Setup and use 4.1 Install GSDML file You can download the GSDML file for the FLEXtra PROFINET switch from the website www.helmholz.de in the download area of the product or use the QR code shown. You can find the “Manage general station description files” dialog in TIA Portal in the menu “Options”. -
Page 5: Setup In The Hardware-Configuration
Insert the "FLEXtra PROFINET Switch 16 port" device into the project and connect it to your PROFINET network. D By calling up the object properties, you must give the FLEXtra PROFINET switch a unique PROFINET name in the project and check the IP address for plausibility. -
Page 6: Setting The Port Properties
"Accessible subscribers" in the topology. Users behind this port can no longer be reached by the CPU. End of topology discovery LLDP frames for topology discovery are not forwarded on this port. Quickstart Guide FLEXtra PROFINET-Switch | Version 1 | 17.09.2020... -
Page 7: Assign The Profinet Switch A Name
The clear identification of the FLEXtra PROFINET switch is ensured here by the MAC address of the device. The MAC address of the device can be found on the device front of the FLEXtra PROFINET switch. If the PROFINET switch has been assigned the correct PROFINET name, it is recognized by the PLC and configured. -
Page 8: Further Configuration And Diagnosis Via The Web Interface
No network cable connected or network cable defective or partner device off Ethernet connection with 10/100 Mbit/s Green Flashing Ethernet communication with 10/100 Mbit/s Ethernet connection with 1000 Mbit/s Orange Flashing Ethernet communication with 1000 Mbit/s Quickstart Guide FLEXtra PROFINET-Switch | Version 1 | 17.09.2020... -
Page 9: Function Of Buttons
Ambient temperature -40 °C ... +75°C Transport and storage temperature -40 °C ... +85°C Relative air humidity 95 % r H without condensation Pollution degree Protection rating IP20 Certifications RoHS REACH Quickstart Guide FLEXtra PROFINET-Switch | Version 1 | 17.09.2020... - Page 10 They are also provided in our download area of the respective products under www.helmholz.de. We also offer to send you or any third party the complete corresponding source text of the respective open source software for an at-cost fee of 10.00 Euro as a DVD upon request. This offer is valid for a period of three years, starting from the date of product delivery.
Need help?
Do you have a question about the FLEXtra and is the answer not in the manual?
Questions and answers