HomeMatic HmIP-WLAN-HAP Mounting Instruction And Operating Manual page 45

If the LED lights up permanently blue, the server con-
nection has successfully been connected. Connect your
smartphone again to the WLAN network to which the
Homematic IP WLAN Access Point has been connected.
Continue with chapter "4.3 Finish set-up" on page 45.
If the LED lights up differently, please follow the instruc-
tions in the app or see "5.4 Error codes and flashing se-
quences" on page 48.
4.3 Finishing set-up
• Confirm in the app, that the LED (A) of your
Homematic IP WLAN Access Point lights up per-
manently blue.
• The Homematic IP WLAN Access Point is regis-
tered to the server. This may take a few minutes.
Please wait.
• After successful registration, press the system
button (A) of your Homematic IP WLAN Access
Point for confirmation.
• Teaching-in will be carried out.
• The Homematic IP WLAN Access Point is now set
up and ready for use.
After the Homematic IP WLAN Access Point has been set-
up successfully, you can teach-in additional Homemat-
ic IP devices. For further information, please refer to the
operating manual of the corresponding device.
Start-up
45