HomeMatic HmIP-WLAN-HAP Mounting Instruction And Operating Manual page 43

If the LED lights up permanently blue, the server con-
nection has successfully been established. Continue with
chapter "4.3 Finish set-up" on page 45.
If the transmission of the WLAN access data has
failed (LED remains permanently white), you can
restart the transmission or use the alternative
procedure (see "4.2.1 Transmission of WLAN ac-
cess data" on page 40).
4.2.2 Alternative transmission of WLAN access data
Alternatively, the Homematic IP WLAN Access Point can
open its own WLAN network to transmit the access data
of your WLAN network. In this case, the smartphone must
change into the WLAN network of the Homematic IP
WLAN Access Point.
For the transmission of data, the LED (A) of the
•
Homematic IP WLAN Access Point has to light
up permanently magenta. If the LED of the
Homematic IP WLAN Access Point lights white,
press the system button (A) to confirm. If the LED
of the Homematic IP WLAN Access Point lights
yellow, press the system button twice.
Start-up
43