Download Print this page

Yamaha DSP-A492 Owner's Manual: Notes About The Remote Control Transmitter

Natural sound av amplifier.
Hide thumbs

Advertisement

NOTES ABOUT THE REMOTE CONTROL TRANSMITTER

Battery installation
1
Battery replacement
If you find that the remote control transmitter must be used
closer to the main unit, the batteries are weak. Replace both
batteries with new ones.
Notes
Use only AA, R6, UM-3 batteries for replacement.
Be sure the polarities are correct. (See the illustration inside
the battery compartment.)
Remove the batteries if the remote control transmitter will
not be used for an extended period of time.
If batteries leak, dispose of them immediately. Avoid
touching the leaked material or letting it come in contact with
clothing, etc. Clean the battery compartment thoroughly
before installing new batteries.
2
3
Remote control transmitter operation range
Remote control
sensor
Notes
There should be no large obstacles between the remote
control transmitter and the main unit.
If the remote control sensor is directly illuminated by strong
lighting (especially an inverter type of fluorescent lamp etc.),
it might cause the remote control transmitter not to work
correctly. In this case, reposition the main unit to avoid direct
lighting.
l6
20
l2
28
8
40
4
60
2
0
–dB
Within approximately
6 m (19.7 feet)
5

Advertisement

   Related Manuals for Yamaha DSP-A492

This manual also for:

Dsp-a592

Comments to this Manuals

Symbols: 0
Latest comments: