Yamaha DSP-A492 Owner's Manual page 25

TO RECORD A SOURCE TO TAPE (OR MD)
1
Select the source to be recorded.
TUNER
2
Play the source and then turn the VOLUME control up
to confirm the input source.
20
28
40
60
3
Begin recording on the tape deck (or MD recorder etc.)
or VCR connected to this unit.
4
DSP-A592
If the tape deck (or MD recorder etc.) is used for
recording, you can monitor the sounds being recorded
by pressing TAPE (MD) MON so that "TAPE
MONITOR" lights up on the display.
VIDEO AUX TAPE (MD) MON
TUNER
DSP-A492
If the tape deck (or MD recorder etc.) is used for
recording, you can monitor the sounds being recorded
by pressing TAPE (MD) MONITOR so that "TAPE
MON" lights up on the display.
TAPE (MD)
TUNER
PHONO CD
VOLUME
l6
l2
8
4
2
0
–dB
2CH/6CH
PHONO CD
MONITOR
PHONO CD
1 4 2
l6
20
l2
28 8
4
40
60 2
0
–dB
Notes
DSP-A592
The settings of DSP and the VOLUME, BASS, TREBLE,
BALANCE controls and the BASS EXTENSION switch
have no effect on the material being recorded.
In step 1, do not make an input source selection so that
"6ch" appears on the display. Signals input to this unit's
6CH DISCRETE INPUT DVD/LD TV/DBS terminals cannot
be recorded by a tape deck, MD recorder or VCR.
DSP-A492
The settings of DSP and the VOLUME, BASS, TREBLE
and BALANCE controls have no effect on the material
being recorded.
25