Yamaha DSP-A492 Owner's Manual page 10

DSP-A592 only
CONNECTING TO VIDEO AUX TERMINALS (ON THE FRONT PANEL)
These terminals are used to connect any video input source such as a camcorder to this unit.
S VIDEO
DSP-A592 only
CONNECTING TO S VIDEO TERMINALS
If you have a video cassette recorder and a monitor equipped with "S" (high-resolution) video terminals, those terminals can be
connected to this unit's S VIDEO terminals. Connect the video cassette recorder's "S" video input and output terminals to this unit's
S VIDEO VCR IN and OUT terminals respectively, and connect the monitor's "S" video input terminal to this unit's S VIDEO
MONITOR OUT terminal. Otherwise, connect the video cassette recorder's composite video terminals to this unit's composite video
terminals, and connect the monitor's composite video input terminal to this unit's composite MONITOR OUT terminal.
Note
If video signals are sent to both S VIDEO input and composite input terminals, the signals will be sent to their respective
output terminals independently.
10
VIDEO AUX
VIDEO L AUDIO R
AUDIO OUT R
AUDIO OUT L
VIDEO OUT
S VIDEO OUT
Monitor TV
VIDEO
IN
MONITOR VCR
OUT IN
S VIDEO
VIDEO SIGNAL
MONITOR
DVD/LD TV/DBS
OUT OUT
VIDEO
Video cassette recorder
R
L
VIDEO
Camcorder
S VIDEO
VCR
IN OUT